Tdi Arms Products

Showing 1–30 of 48 results

  • $19.99

    UPG16 – AR15/M4/M16 Interchangeable Finger Groove Pistol Grip

    • The 6 piece interchangeable pistol grip incorporates multiple
    finger groove and palm swell inserts (3 each).
    • Allowing the user to customize their grip to fit all hand sizes for maximum
    comfort and control.
    • Provides increased control during firing and reduces fatigue

    • Finger grooves, palm swell and contoured backstrap allow an increased powerful grip

    • Easily changeable front and rear rubberized grip inserts mount securely

    • Mottled surface minimizes risk of slippage when wet

    • Easily replaces standard grip

    • Constructed of high density polymer

    * Colours: Black, Khaki, OD Green
    Weight: 5.9oz / 165gr. (UPG16).
    Height: 4.00″ / 11cm.

  • $19.99

    UPG47 – AK47 Interchangeable Finger Groove Pistol Grip

    The 6 piece interchangeable pistol grip incorporates multiple finger groove and palm swell inserts (3 each).
    Allowing the user to customize their grip to fit all hand sizes for maximum comfort and control.
    Provides increased control during firing and reduces fatigue.
    Finger grooves, palm swell and contoured backstrap allow an increased powerful grip.
    Easily interchangeable.
    Front and rear rubberized grip inserts mount securely.
    Mottled surface minimizes risk of slippage when wet.
    Easily replaces standard grip.
    Constructed of high density polymer.
    Constructed of high density polymer.

    Colours: Black, Khaki, OD Green
    Weight: 5.9oz / 165gr. (UPG47).
    Height: 3.93″ / 10cm.

    UPG47 – AK47/GALIL Style Grip

  • $15.99

    AG47 – Tactical Pistol Grip for AK47/GALIL

    This tactical pistol grip is sure to increase the performance of your gun.
    Made from reinforced polymer composite.
    Incorporates finger swells and a back strap that is designed with surfacing to enhance your grip.
    Minimize the chance of slippage should the grip become wet.
    Light-weight
    Lifetime Warranty

    Colors: Black, Khaki, OD Green
    Weight: 4.90oz / 125gr.
    Height: 3.93″ / 10cm.

    # AG47

  • $18.99

    The TDI-ARMS ERG is an enhanced version of a classic design of a well known widely used grip. However, the original grip lacked the needed NON SLIP texture used for an ergonomic more direct hold. With our custom design “SWAMP MIST” grip pattern & dedicated grip lines the ERG will provide the user with a comfortable direct gripping surface combined with a straighter angle of the grip and with a classic look.
    The ERG is suitable for ALL AK type rifles, shotguns & pistols in tactical or classic configurations.

    Colors available: Black, FDE

    The grip is supplied with a bolt for fitting

  • $19.99

    FFG-4 – Folding 5-Position Forearm Grip

    • Folding Steady Grip
    • Locks at horizontal, vertical, 45 & 135 positions
    • Improved performance during rapid fire
    • Easy to fit & secure
    • Fits Picatinny/Weaver Rail
    • Light-weight
    • Moulded from reinforced polymer composite
    • Length in vertical position: 4.5″ / 11.5cm
    • No gunsmithing is required

    * Colours: Black, FDE/Tan
    * Weight: 3.92oz / 110gr.
    * Height: 4.5″ / 11.5cm

    # FFG-4

  • $15.99

    FFG2 is a molded polymer 3-position folding vertical grip. Side push button allows operator to switch between different grip positions.

    • Folding Steady Grip
    • Locks at horizontal & vertical positions
    • Improved performance during rapid fire
    • Easy to fit & secure
    • Fits Picatinny/Weaver Rail
    • Light-weight
    • Moulded from reinforced polymer composite
    • Length in vertical position: 4.5″ / 11.5cm
    • No gunsmithing is required
    • Storage Compartment
    • Lifetime Warranty

    * Colours: Black
    * Weight: 120gr/4.23oz.
    * Height: 11.5cm/4.52″

    # FFG-2

  • $14.99

    AVG – Front Arm Ergonomic Vertical Grip

    Advanced Ergonomic Tactical Grip
    Easy to fit & secure
    Fits Picatinny/Weaver Rail
    atural “Fighting Stance” hold on your rifle
    Improved performance during rapid fire
    Storage compartment on bottom
    Light-weight
    Moulded from reinforced polymer composite
    NSN number: 1005015156484
    No gunsmithing is required
    Lifetime Warranty

    Colours: Black, Khaki, OD Green
    Weight: 3.92 / 110gr.
    Height: 4.72″ / 12cm.

  • $14.99

    BVG – Bi Functional Vertical Grip Commando Type

    • Fits Hand Guard Equipped With a Weaver Or Picatinny Rail System.
    • Improved Performance In Reaction “On Target” Time And Muzzle Control During Rapid Fire.
    • Waterproof Compartment For 3 CR123 Batteries.
    • Quick Detach Mechanism.
    • Moulded From Reinforced Plastic Composite.
    • Super Light Weight.

    * Colours: Black
    * Weight: 2.92oz
    * Height: 5.11″

    # BVG

  • $14.99

    SVG – Front Arm Short Vertical Grip

    Advanced Ergonomic Tactical Grip
    Easy to fit & secure
    Fits Picatinny/Weaver Rail
    Natural “Fighting Stance” hold on your rifle
    Improved performance during rapid fire
    Storage compartment on bottom
    Light-weight
    Moulded from reinforced polymer composite
    Grip Length: 4 inches/10cm
    NSN number: 1005015156480
    No gunsmithing is required
    Lifetime Warranty

    Colours: Black, FDE, OD Green
    Weight: 3.07oz / 86gr.
    Height: 3.93″ / 10cm (grip)

    # SVG

  • $99.99$115.99

    AKM Lower handguard for standard STAMPED AK platforms features:
    * 3 side mounting surface features
    * A left side only quick detach slot
    * Light weight construction made from Aviation grade aluminum.

    * FITS RIFLE TYPES: AKM AK47/74/101

    Russian
    Bulgarian
    East German
    Egyptian
    Polish

    * AKML Fits the OEM / Ultimak gas tube rail with no modification to the product

    * AKML DOES NOT FIT: Milled rifles and other variants

    Yugo/Aksu/Krinkov/Vepr (see VPRL)

    Zastava M70 (see Z70)

    Zastava M92/M85 (see Z92)

    Personalize your AKML with either one or 2 line of your own saying (see images of the AKML & Z70 below).

    * Weight: 3.52oz / 100gr
    * Color: Black

    # AKML

    ** IMPORTANT: AS YOU MAY KNOW NOT ALL AK VARIANTS ARE CREATED EQUAL THEREFORE SOME MANUAL FITTING MAY BE REQUIRED IF YOU ARE HAVING ANY KIND OF ISSUES PLEASE DONT HESITATE TO CONTACT US.

  • $99.99$115.99

    The Tdi-Arms Z70 (Zastava AK47) is an aluminum lower MLOK handguard that keeps your rifle light yet operational with all your tactical attachment needs via MLOK system.

    The Z70 is comparable with the Zastava M70 N-PAP / O-PAP / Z-PAP & M90 rifles also the Z 70 is compatible with the Ultimak gas tube rail.

    The Tdi-Arms Z70 blends in with classic all wood style as well as tactical mode.

    Personalize your Z70 with either one or 2 line of your own saying (see images of the Z70 & AKML below).

    Color: Black

    Weight: 4.2oz

    For:

    AK47/74/101 (Russian, Bulgarian, East German, Egyptian, Polish see AKML)

    Yugo/Aksu/Krinkov/Vepr (see VPRL)

    Zastava M92/M85 (see Z92)

  • $99.99$115.99

    The Tdi-Arms Z92 (Zastava AK47) is an aluminum lower handguard that keeps your rifle light yet operational with all your tactical attachment needs via MLOK system.

    The Z92 is compatible with the Zastava M92/M85 rifles also the Z92 is compatible with the Ultimak gas tube rail.

    The Tdi-Arms Z92 blends in with classic all wood style as well as tactical mode.

    Personalize your Z70 with either one or 2 line of your own saying (see images of the Z70 & AKML below). On the Z92 we can do 1 line on each side.

    For:

    AK47/74/101 (Russian, Bulgarian, East German, Egyptian, Polish see AKML)

    Yugo/Aksu/Krinkov/Vepr (see VPRL)

    Zastava M70 (see Z70)

    Color: Black

    Weight: 4.2oz

  • $24.99

    LHV47 – AK47 Polymer 3 Rail Lower Handguard

    AK47 Forearms handguard specifically designed to provide a rigid lightweight platform to mount virtually any Picatinny accessory.

    * A full length lower Picatinny rails
    * Easy to fit & secure
    * Fits Picatinny/Weaver Rail
    * 2 mini side rails
    * Constructed of high density polymer for strength and heat resistance
    * Lower handguard is 6.38″ / 16.20cm overall with a 4.13″ / 10.15cm lower rail and
    * Side rails 3.8cm
    * Compatible with most AK style rifles

    Colours: Black
    Weight: 6.21oz / 174.00gr.
    Length: 6.38″ / 16.20cm
    Height: 1.57″ / 4.00cm

    # LHV47 – AKM Lower mount

  • $29.99

    LHV47S – AK47 Polymer 4 Rail System

    AK47 Forearms handguard specifically designed to provide a rigid lightweight platform to mount virtually any Picatinny accessory.

    * 2 full length upper and lower Picatinny rails
    * Easy to fit & secure
    * Fits Picatinny/Weaver Rail
    * 2 mini side rails
    * Constructed of high density polymer for strength and heat resistance
    * Complete handguard set
    * Upper handguard is 4.37″ / 11.10cm body with a 4.74″ / 12.05cm rail
    * Lower handguard is 6.38″ / 16.20cm overall with a 4.13″ / 10.15cm lower rail and
    * Side rails 1.50″ / 3.8cm
    * Compatible with most AK style rifles

    Colours: Black
    Weight: Set 8.21oz / 230gr. Upper 2oz / 56gr. Lower 6.21oz / 174gr.
    Length: 6.50″ / 16.5cm (Set)
    Height: 2.54″ / 8.0cm (Set)

    # LHV47S – Upper & Lower mounts set

  • $24.95

    EVO-FAS – Forward Assist Grip

    The Tdi-Arms EVO is a Hybrid hand stop that can be combined symbiotically with vertical grips to provide a stable shooting platform in the C clamp hold as well as standard vertical grip.
    Experience: The very popular C clamp hold is a innovative concept of rifle stabilization but it is primerely effective in stance shooting but when fighting in a confining environment in a Close quartets environment or vehicle operations there is a need to shorten the hold on a rifle/carbine by transitioning to a vertical grip, and mounting a angled + vertical grip is bulky and space consuming.
    THE Tdi-Arms EVO-HHS Combines its self with a vertical grip without taking up space and can be combined with a variety of vertical grips OR can be used as a light weight minimal HAND STOP.
    The EVO-HHS Is made from a light weight aluminum compost and it is wider than most hand stops it can also be used as a BARRICADE STOP.

    • Hybrid Grip
    • Enabling the use of vertical grip with horizontal position
    • Improved performance
    • Easy to fit & secure
    • Fits Picatinny/Weaver Rail
    • Light-weight
    • Made of Aluminum
    • No gunsmithing is required

    * Colours: Black, Khaki, OD Green

    * Weight: 2.00oz / 56gr.
    * Height: 1.57″ / 4.00 cm
    * Length 2.95″ / 7.50 cm

    # EVO

  • $49.99

    Tdi-arms SA-M70 is a stationary raised M70 Yugo AK rifle series adapter
    allowing the user to change the original wood stock to an M4 collapsible stock.
    The SA-M70 could be purchased as a stand alone adapter that comes with a mounting screw or
    the full kit including the SA-M70 adapter + end plate adapter + locking ring + mil spec 6 position tube (SA-M70T).
    The SA-M70 is made from T6160 aluminium and requires no gunsmithing to install.

    #SA-M70 – Stand alone adapter with mounting screw.

  • $69.99

    Tdi-arms SA-M70T is a stationary raised M70 Yugo AK rifle series adapter
    allowing the user to change the original wood stock to an M4 collapsible stock.
    The SA-M70T could be purchased as a stand alone adapter that comes with a mounting screw or
    the full kit including the SA-M70 adapter + standard end plate adapter + locking ring + MIL spec 6 position tube.
    The SA-M70T is made from T6160 aluminium and requires no gunsmithing to install.

    #SA-M70T – SA-M70 adapter + endplate adapter + locking ring + mil spec 6 position tube. AK M4 Stock Adapter for Yugo M70, NPAP and OPAP + MIL Std Tube, Castle Nut and a QD Plate

  • $49.99$66.00
    AKMST is a stand alone conversion adapter for FLAT back stamped AKMS (UNDERFOLDER)  receivers.
    The AKMST is a drop in replacement for your underfolding stock and it is available for purchase in several configurations:
    • *  AKMST: An adapter interface for a 6 positions buffer tube  (DOES NOT INCLUDE TUBE OR CASTLE NUT)
    • *  AKMST-P: An adapter with a rear picatinny interface that allows you to install SIG type folding stocks and braces.
    • *  AKMST-K: An adapter with a 6 positions tube interface that includes a 6 position mil spec tube and a castle nut.
    Fits: AKMS Stamped receivers with a flat back interface.
    Does not fit: YUGO rifles & slant back receivers. 
    NOTE: Please make sure you know the placement of your rivets on the rear trunnion and do not use excessive force while installing the adapter.

    Colors: Black
    ………………………………Weight               Length
    AKMST                        4oz                     1.25″
    AKMST-P                     3oz                     0.75″
    AKMST-K                     8oz                     8.00″

    #  AKMST  -An adapter for underfolder, AR tube interface
    # AKMST-P  – An adapter + Picatinny interface
    # AKMST-K  – An adapter + Mil Tube + Castle nut

  • $49.99

    AKST

    Light weight Aluminum drop in adapter tube for STAMPED receiver
    AK type rifles features a simple drop in installation process a left side sling loop
    and an inner storage space the 6 position tube is MIL-SPEC in diameter.

    Fits:
    SOVIET/RUSSIAN
    POLISH
    BULGARIAN
    EAST GERMAN
    EGYPTIAN

    And any other AK type rifles with a standard com block stamped receiver with a fixed stock.

    Color: Black
    Weight: 8oz

  • $24.99

    M16T – M16/M4 6 Position Buffer Tube

    Lightweight buffer tube for OEM replacement.16/M4 style stock.
    • The 6 positions allow length adjustment up to 4.00″/10cm.
    • Storage Compartment for cleaning kit and more.
    • Supplied with the Castle Nut and Locking Washer.
    • Lifetime Warranty

    * Color: Black
    * Weight: 4.20oz/118gr.
    * Length: 7.87″/20cm.

    # M16T – Replacement for AR15/M16.M4 OEM Buffer Tube

  • $29.99

    RSR-AK

    A simple light weight solution designed for the mounting of Red Dot Sights.
    Replaces the original the rear AK sight to provide a stable light weight mounting platform.

    Made of T6160 Aluminum with Hard Anodized and anti scratch Teflon coated for maximum durability

    Easily attaches instead of the original AK rear sight by a steel screw & nut a see trough channel cut provides perfect co witness when not using red dot sight.

    When installed and used as an iron sight, elevation is equivalent to 100m.

    Specifications:
    Usable Length: 4″
    Rail Type: Picatinny
    Color: Black

  • $49.99

    TUZA1 – UZI Bayonet Lug Rail Mount, Aluminium

    • Turns your bayonet lug into a Picatinny rail mount
    • Allowing the addition of rail accessories.
    • CNC milled from aviation aluminium.
    • No gunsmithing is required
    • NSN number: 1005015156505 (TUZ-A1)

    * Colours: Black
    * Weight: 1oz.
    * Length: 1.69″

    # TUZA1 – Uzi/Mini Uzi

  • $49.99

    BER-A1 – Under barrel Beretta 92F rail system

    • Quickly adds Picatinny rail to your handgun
    • Maximize pistol versatility by fitting light or laser equipment
    • Clamps onto the trigger guard area providing stability
    of the mounted accessory
    • CNC machined from aviation grade Aluminium
    • Easy to fit/remove and secured by Allen screws
    • Lifetime Warranty

    * Colours: Black
    * Weight: 1.7oz
    * Length: Rail 2.04″
    * Height: Rail 0.31″

    #BERA1 – Beretta 92F

  • $11.00$13.00

    MLOK-R/3/5/6

    Tdi-Arms MLOK Rail sections are steady portions of Picatinny rail that you can add
    on a MLOK interface for attaching Picatinny mounted accessories & attachments.
    Made from T6160 aluminum
    Come with steel MLOK screws & a mounting wrench.

    Color: Black

    Available in:

    3 SLOTS RAIL
    5 SLOTS RAIL
    6 SLOTS RAIL

  • $8.99

    PBSS – Push Button Sling Swivel
    1.50″ / 3.80cm rugged all steel sling swivel
    Push button design for quick detachment
    Easily attaches to Collapsible Stocks with built in QD
    0.20″ / 0.50cm thick blued steel ring
    Colours: Black
    Weight: 1.00oz /28.00gr.
    Length: 1.50″ / 3.80cm.

    # PBSS

  • $18.50

    QUICK DETACH HEAVY DUTY M-LOK MOUNT

    The TDI-ARMS QDM is Mlok mounted quick detach mount for heavy duty use.
    The QD stud is the standard industry used size and it is included with the mount.
    Provides steady mounting of carbine sling points or direct QD studs.
    Allows for the quick attachment of slings and push button swivels to M-LOK compatible hand guards
    The mount is a rugged mil spec-anodized aluminum construction.
    QD is a steel construction.

    # QDM

  • $18.50

    QUICK DETACH HEAVY DUTY KeyMod MOUNT

    The TDI-ARMS QDK is KeyMod mounted quick detach mount for heavy duty use.
    The QD stud is the standard industry used size and it is included with the mount.
    Provides steady mounting of carbine sling points or direct QD studs.
    Allows for the quick attachment of slings and push button swivels to KeyMod compatible hand guards
    The mount is a rugged mil spec-anodized aluminum construction.
    QD is a steel construction.

    # QDK

  • $139.99

    The V6 revolutionary design takes full advantage of the escaping gases and directs those forces at exactly the perfect angles and precise directions, to counteract 100% rise and reduce 70% to 80% recoil.

    The NEW V6 is the finest muzzle brake that money can buy.
    Machined from High Grade Aluminum on a 5-axis CNC machining center, this is truly a fistful of “Heavy Metal” that will impress you the first time you place it in your hand.

    Please watch the V6 in test: https://onedrive.live.com/?authkey=%21ABrT22a8ErB2-IU&cid=3F51DDDC14EAB1F4&id=3F51DDDC14EAB1F4%2157242&parId=3F51DDDC14EAB1F4%2155570&o=OneUp

    Who needs the V6? It is perfect for competitive shooters, hog hunters and anyone who needs rapid acquisition in follow-up shots. U.S. design, U.S. aluminum, and U.S. manufacture. Sealed & coated with hard anodize this is a beautifully designed and flawlessly produced product that looks as professional as it is effective, it reduces muzzle rise to virtually “ZERO”. That’s right…no matter what you run through the gun, the shooter will have almost NO muzzle rise.

    In addition, it reduces felt recoil by approximately 70-80%. This is a true game changer! The V6 revolutionary design takes full advantage of the escaping gasses and directs the forces at exactly the perfect angles and directions. The gases reach the end of the muzzle before the projectile. The V6 design then pushes the muzzle down and away from the shooter.

    Technical Specifications:

    Material: Alloy
    Coating: Hard Anodise
    Length: 4.25″
    Weight: 10.2 oz / 4oz for Alloy
    Design: V6 Engine Block

    Models: Saiga 12
    VPER 12
    Kel-Tec KSG
    DDI 12
    XTR 12
    Catamount Fury

  • $26.99

    S1P-HK – One Point Bungee Rifle Sling

    Ideal for close quarters combat, allows easy movement when operating inside tight spaces. Maintains its structure and provides a comfortable carry option.
    Fully adjustable sling fits all body sizes.
    Side release buckle allows for quick release if sling encounters interference with objects.
    Strong metal HK style carabiner for easy attachment.
    High density bungee cord and carabiner are covered to reduce noise and wear
    Sling can be worn on back freeing hands for the other tasks.
    Sling easily snaps onto many mounting locations.
    Color: Black
    Weight: 4.82oz / 135.00gr.
    Max Loop Length: 60.00″ / 152.00cm.

    Part #: S1P HK

X